Results 1 to 12 of 12

Thread: Bowl Number 6, What Do You Think?

  1. #1
    Join Date
    Aug 2007
    Location
    Fauquier, Virginia
    Posts
    54

    Bowl Number 6, What Do You Think?

    My first one blew up, the second one came off the chuck, and number three I sanded threw the bottom....... Four and five came out very thick sided. So here is number six:



    and



    Comments welcome.

  2. #2
    Join Date
    Apr 2005
    Location
    Atlantic City New Jersey
    Posts
    1,066
    Looks good. Way to hang. What kind of wood is it and how big is it? On the ones you sanded through the bottom, try gluing another piece of wood on and returning it. I did a couple like that and they came out very nice. Also, thick sided bowls can be thinned down. Just put 'em back on the lathe and keep turning.

  3. #3
    Join Date
    Jul 2006
    Location
    DuBois,Pa
    Posts
    1,557
    Jim looks great you get the feel and it will start coming easier good luck,

    Bob

  4. #4
    Join Date
    Oct 2006
    Location
    Harvey, Michigan
    Posts
    20,804
    Not a bad looking bowl Jim! I really like the wood grain! Like Bob stated - the more you turn - the easier it gets! Have fun with it!
    Steve

    “You never know what you got til it's gone!”
    Please don’t let that happen!
    Become a financial Contributor today!

  5. #5
    Join Date
    Aug 2007
    Location
    Fauquier, Virginia
    Posts
    54
    Rich,

    The bowl is about 6 1/2" across and 3" tall. The wood is soft maple. Thanks for the comments!

  6. #6
    Nice looking bowl you got there. Keep up the good work.

  7. #7
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    Very nice looking bowl. Keep'em coming.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  8. #8
    Nice bowl there, sir! Maple, eh? The figure and color almost could pass for some member of the olive family.

    Nice thing about bowls is that there are SOOOOOO many shapes that are pleasant to touch and easy on the eyes. This is one of those.

    There are some among us that have foot fetishes. At least when it comes to things turned. Some like 'em, some don't. Just a personal taste thing, same as with those who might buy your work. Some won't even look at a footed anything. Some others see feet as belonging only on "practical" bowls.

    I especially like the transitions between flats and curves on your piece. The rim moves nicely to the inside and then swoops into the bottom. The sides have the straight taper that moves to the compound curve at the bottom, too. Nicely done. Doesn't jerk the eye. And the curve looks like it just keeps on going right on through the foot. Nice work!
    Dean Thomas
    KCMO

  9. #9
    Join Date
    Dec 2006
    Location
    Purcellville, Virginia
    Posts
    279
    Good looking bowl, Jim.

  10. #10
    Join Date
    Aug 2007
    Location
    Fauquier, Virginia
    Posts
    54
    Thanks to all. One out of six is good odds for me!!!!!!!!

    Dale, I was thinking of Tom's words the whole time I was working on it......

  11. #11
    Persistence paid off, Jim. Very nice work!
    1,372 miles south of Steve Schlumpf, 525 miles west of that Burns fellow.

    Never, under ANY circumstance, make the last cut!

  12. #12
    Way to stick with it! Looks great and what a piece of wood there!
    If at first you don't succeed, look in the trash for the instructions.





Similar Threads

  1. Newbie bowl turning question
    By Joe Melton in forum Turner's Forum
    Replies: 11
    Last Post: 01-12-2008, 1:06 PM
  2. Maple burl "art" bowl
    By Dominic Greco in forum Turner's Forum
    Replies: 13
    Last Post: 12-08-2004, 10:23 PM
  3. Wild Cherry Bowl
    By Bill Grumbine in forum General Woodworking and Power Tools
    Replies: 10
    Last Post: 12-22-2003, 8:14 PM
  4. A Bowl Kit -- A Story and Photos (Long)
    By Ken Salisbury in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 09-11-2003, 1:24 PM
  5. Big Maple Salad Bowl
    By Dominic Greco in forum General Woodworking and Power Tools
    Replies: 13
    Last Post: 08-29-2003, 3:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •