Biesemeyer on Jet? Bad Xacta Fence design

[Thomas Charles Williams]

This is a photo of an early 90Â’s Xacta fence. I bought the saw in 1993 new.
The pad is an 1/8” thick pad, and you can get them everywhere. There’s nothing exotic about them.

Attachment 492115

As a caution to anyone upgrading their fence system, use counter sunk screws to attach the front “L” bracket. Do not use hex head bolts. You’ll only ever do it once.��
Those can really hurt your fingers when repositioning the fence.

Thanks, I do not have the pad on the 21 inch mark. I put 2 newer pads on the clamp end, and used " rapidfuse" without the primer and it seems to be holding

Tom

[Thomas Charles Williams]

IMG-2418.jpgIMG-2419.jpg

[Thomas Charles Williams]

top is the after with the rapidfuse