I while back a built a cherry project that I did a Watco Danish Oil mixed with some poly finish on it. After the oil dried I waxed the piece. I liked the finish then and now 3 years later I really love it. Problem is I never really wrote down what I did and what my mix was.

As far as I can recall, I used a light card scraper to do a final smoothing of the piece (I was in an anti sandpaper phase then) Then I did a coat of straight danish oil, wiped it down and let it sit for a few days. Then I sanded with more danish oil and 800 grit wet sand paper. Then it sat, then I mixed 1 part poly to 6 parts Danish oil and did 4 more coats. when everything was dry I waxed the peice. The finsh was kind of a satin look, that was very soft and natural (you can't tell poly was used). I found the peice very easy to maintain over the years and the finish has always been great to touch.

Do this soudn like good finish?