Something different for me. Cherry 10" x 4". coat of danish oil, buffed.
I think I have a lot of work to do on form.
Thanks for looking,
Tom
cherry vase 111207.jpg
Something different for me. Cherry 10" x 4". coat of danish oil, buffed.
I think I have a lot of work to do on form.
Thanks for looking,
Tom
cherry vase 111207.jpg
South Charleston
Ohio, USA
I like it a lot. Simple yet elegant. I woul halike a bit more flare throught the top and not lines in the center. Never the less I like it a lot.
Alex
Hey...that's great Tom!!! I agree that you have some minor adjustments to make..but really, it's a very nice form. How was hollowing under the shoulder?
~john
"There's nothing wrong with Quiet" ` Jeremiah Johnson
You definitely don't have to work on your still life photography skills because that picture, in my opinion, is spot on. It looks like it was painted.
As for the form, I think it's great too. The curves in the bottom section and the neck blend really well and it's very natural looking. I don't mind the horizontal line placement either. Did you hollow it through the bottom?
Raymond Overman
Happiness is a warm chainsaw
"Do not wait, the time will never be just right. Start where you stand, and work with whatever tools you may have at your command. Better tools will be found as you go along." Napolean Hill
Confession: It was a early Sunday morning "doodle". Very green piece of wood. I cut in half and glued it back together, hence the grooves. As for inside the shoulder.. piece of cake..used a big scraper
I spoke with some local turners who are very experienced with turning similar pieces. They almost alway turn them green and said that turning them endgrain minimizes the possibility of the two halves warping weirdly and seperating. So, I followed their advice,turned it very thin and let it sit for a week, thinking it would to pull apart as it dried. But, it didnt.
I actually have some real hollowing tools but find the whole process of hollowing to be extremely frustrating. I admire those folks who do it so well!!! A captive ring hollowing set up may in the future... but its way down the list...right after finishing the shop, the big bandsaw, outboard setup, vacuum chuck etc etc etc. So, in the meantime, I will work on form and perfecting the "cheater technique"
Tom
South Charleston
Ohio, USA
Nice job Tom, sometimes them early morning doodles turn out pretty cool, I like it.
John 3:16
Tom,
It's not a cheater technique if it works. Getting a hollowing tool in the neck of that piece would have been a bear and I like the outcome of what you've created. Thanks for sharing the process.
Raymond Overman
Happiness is a warm chainsaw
"Do not wait, the time will never be just right. Start where you stand, and work with whatever tools you may have at your command. Better tools will be found as you go along." Napolean Hill
Tom, that's actually a very nice form and a beautiful piece. Hollowing from the bottom is not "cheating" for this kind of form, either...it's actually quite normal. Nice work!
--
The most expensive tool is the one you buy "cheaply" and often...
Tom, gotta say I like it. Simple but elegant.
Tom that is beauty. Simple form but very nicely done.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Absolutely love it! Beautiful simple form, flowing curves and finish! Couldn't ask for anything more from a hollow form! Great work and photography!
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
Very nice looking piece
Mike Vickery
Stunningly gorgeous piece, Tom. IMHO, there's not much (if any) work to do on form. The shape is, to my eye, natural and graceful---reminiscent of a gourd.
That's not a light at the end of the tunnel; It's a naked singularity.
Henry C. Gernhardt, III
Very nice piece Tom.
[SIGPIC][/SIGPIC]Tom
Turning comes easy to some folks .... wish I was one of them
and only 958 miles SE of Steve Schlumpf
Tom - Very nice indeed.