Results 1 to 11 of 11

Thread: Laptop wireless question.

  1. #1
    Join Date
    Apr 2003
    Location
    Grove City, Ohio
    Posts
    226

    Laptop wireless question.

    I need to add a wireless card to my laptop. I am looking for the wi-fi type connection. What type or wireless card do I need to add?
    I went to the local Microcenter and when asked for help I was sent to another counter, who sent me to another counter and when a manager type was asked, I was told they were busy. (Borg customer service comes in other colors besides orange and blue) Anyway I would appreciate any input.

  2. #2
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,894
    If you are not going to be in any corporate environments, an 802.11g card is all you need...and it will work with both the older and slower 802.11b as well as the faster 802.11g access points. Do be sure that the card you select supports the latest security standards/methods including WPA-2. With this kind of card, you're good to go at any public hotspot or at home. (You really want your computer to be running either Windows XP or Vista for maximum security and hardware driver availability)

    If you do need to work in corporate environments, I recommend an a/b/g card so that you also have access to 802.11a which runs on a different frequency than b/g networks.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    Join Date
    Sep 2007
    Location
    Ashburn, Virginia
    Posts
    92
    Obvious stupid question aside: Do you have a wireless router/switch?

    If so, all you need is a wifi cardbus or even a usb wifi adaptor.

    Its typically better to get the same brand as your router, or so I've been told, but have never had any problems cross-branding wireless equipment.

    Also you'll want to pay attention to which 108.11 band is being used on your router.

    You can usually go down but not up in bands. This means that if your router is 108.11b you are going to be stuck at 11Mbps and will need a 108.11b network device. If the router is 108.11g, you can get up to 54Mbps with a 108.11g device or go down to 108.11b

    Some routers and same brand network devices will have a special protocol that allows them to "burst" the speed. 54Mbps becomes 108Mbps. This is the one benefit for keeping branding the same but ONLY if the router/network device supports it.

    Hope this helps
    -==--==--==--==--==--==--==-
    Karlan Talkington

    "If there must be trouble, let it be in my day,
    that my children may have peace." -- Thomas Paine

    Support the Creek! Donate Today!

  4. #4
    Join Date
    Jun 2006
    Location
    Independence, MO, USA.
    Posts
    2,472

    Two types of wireless, one requires a hotspot.

    I recently had somebody ask me this, only they didn't exactly mean it. How old is your computer? It doesn't have wireless built in? If not, your looking for a pcmcia card (I believe they now just call them a pc card). Then you have to find a hotspot (free or paid wireless internet access)
    However, if your looking for the wireless anywhere/anytime card, that is a different animal. It requires a more expensive service like Sprint (local one seen mostly on salesmans pc's), or others as I believe it is a sideband to the wireless phones (and is more expensive). These are also a pcmcia (pc card).

  5. #5
    Join Date
    Apr 2003
    Location
    Grove City, Ohio
    Posts
    226
    Thanks for the replies. I need this for a 4 or 5 year old lap top that runs XP and I use to check personal email and the web. I do not have a wireless router at home so I am looking to use this for the hot spot type of access at motels and coffee shops. Is there one brand better than another?

  6. #6
    Join Date
    Feb 2003
    Location
    Chesterland, OH
    Posts
    41

    Don't scrimp on the card

    You can get a wireless card for very cheap. Microcenter often has them. Don't be penny wise - I have one in a box - used 4 days before it simply refused to connect any longer. Not worth the cost of postage to return it. Bought a new Netgear card (we have a Netgear home network) and have never had a problem since.

  7. #7
    While an 802.11b/g card will work for you, I'd buy an 802.11 b/g/n card. The "N" version (actually "pre-N" but I won't go into that) will give you higher speed and longer range when it connects to a "N" base station. If the base station does not support "N", it will connect as a "b" or "g" version (lower speed, shorter range).

    Mike
    Go into the world and do well. But more importantly, go into the world and do good.

  8. #8
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,894
    Mike, I doubt he's going to find a "pre-N" situation in the hotspots, so I'm not sure it's worth the extra cost for that option. And between different manufacturers, there are compatibility quirks with the pre-N stuff. They are good, but best when paired with the same brand access point which is easy to do at home, but not on the road.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  9. #9
    Quote Originally Posted by Jim Becker View Post
    Mike, I doubt he's going to find a "pre-N" situation in the hotspots, so I'm not sure it's worth the extra cost for that option. And between different manufacturers, there are compatibility quirks with the pre-N stuff. They are good, but best when paired with the same brand access point which is easy to do at home, but not on the road.
    You're right. I'd go for the N version for home use to get higher speed and greater range around the house. For travel - at hotspots - the N card will connect at b or g speeds. It the OP is not going to use wifi at home, I'd also recommend the b/g version because they're less expensive than the N versions

    My recommendation was for home use.

    Mike
    Go into the world and do well. But more importantly, go into the world and do good.

  10. #10
    Join Date
    Nov 2006
    Location
    Conway, AR
    Posts
    399
    I would reccommend a Belkin Pre-N wireless card. I bought mine off of ebay for $35. If you get a cheapy (those $15 on ebay) one you will be disspointed, dropped connection, low range. I have one installed on a desktop and the card can just pop out and slip right into your laptop from desktop. Its worth the extra $$$

  11. For connecting to hotspots, I've used Belkin, Netgear and Linksys PC cards and the USB wireless modems. b/g works most everywhere. When you are traveling, look for independent gourmet coffee houses that offer free wireless if you buy a cup of coffee. They usually have the wireless router right there in the little shop, so you get good reception. Places like Starbucks are in with a hot spot provider, so you pay either a monthly fee or have to pay $9 a day for access.

    I get horrible reception in hotels with whatever I've used, with few exceptions. The "free internet" service is so bad in most hotels that I no longer use that as a deal breaker when looking for price. If they have wired ethernet, fine, but wireless networks are often not even IN the hotel (and in Lake Tahoe recently, I figured out the wireless was being shared by about a dozen little motels).

Similar Threads

  1. Lurker peering thru the door with a rail and stile question? (Long)
    By Chris Wilson in forum General Woodworking and Power Tools
    Replies: 10
    Last Post: 03-13-2007, 5:20 PM
  2. Shop moving question?
    By Alan Tolchinsky in forum General Woodworking and Power Tools
    Replies: 20
    Last Post: 02-13-2006, 9:31 AM
  3. Lathe and bowl question
    By Jason Wulff in forum Turner's Forum
    Replies: 15
    Last Post: 01-06-2006, 2:09 PM
  4. HI - New to this forum - got a question 'bout lathes
    By Matthew Dworman in forum General Woodworking and Power Tools
    Replies: 14
    Last Post: 06-01-2004, 10:38 PM
  5. A Different Question re: Old vs. New Planes
    By Lewis Lamb in forum Neanderthal Haven
    Replies: 3
    Last Post: 01-28-2004, 6:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •