Hi Creekers,
I hope none of you are in that messy weather!
Anyone know how to make the defualt for the current page only?
Hi Creekers,
I hope none of you are in that messy weather!
Anyone know how to make the defualt for the current page only?
Brian Robison
MetalMarkers
Epilog Mini
Rabbit 1290
Brian, I'm trying to figure out how you do multi-page graphics in Corel.
Nancy (8 days)
Nancy Laird
Owner - D&N Specialties, Rio Rancho, New Mexico
Woodworker, turner, laser engraver; RETIRED!
Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
SMC is user supported. http://www.sawmillcreek.org/donate.php
___________________________
It's nice to be important, but it's more important to be nice.
Hi Nancy, I did it before but now I have a new computer so....
Any Who...8 Days wooooo hooooooo!!!!!!
Brian Robison
MetalMarkers
Epilog Mini
Rabbit 1290
I am not sure I total understand what you want but if you are asking how to make current page the default when you select print you need to do that from the printers folder not from the application. Go to Printers and right click on your print driver and select properties. This will give you a screen just like you see when you select print from the application. Set the selection to current page and save or select OK. This should set it to be default. If you do it from the application it is only good for that print job.
Hope this is what you are looking for
Alan
Nancy:
At the bottom of the screen (Corel X3) the current page is stated. Click on the + sign and Corel adds a page (layer) to the document. I use it all the time. I cut a lot of big foam letters for signs. I cut some yesterday that were 18" tall that spelled out Diane's Luxury Pools. My sheet size is the size of my table, 24x36, but, I can't get but a couple of letters per page, so I put the whole thing in on multiple pages. Obviously I can't cut but one page at a time, but I just go from page to page.
I select the graphics on the page I am sending to the laser. In the Epilog driver I select print "Selection". Not sure about your drivers though. I continue the process until I am finished with all the pages.
Hope this helps answer your question.
Epilog Legend EXT36-40watt, Corel X4, Canon iPF8000 44" printer,Photoshop CS6, Ioline plotter, Hotronix Swinger Heat Press, Ricoh GX e3300 Sublimation
I think what he's asking for is to change the default on the Corel print dialog: options are 'current document' (the default), 'documents' (presumably all open files), 'current page' (what he wants to be the default), 'selection', and a typical 'page' option that only activates for multipage files. (And no, I don't know why 'current page' is available on a single-page document. There's also a 'properties' button on that dialog that goes to the screen you described.)
Nothing I can find in the Corel 'options' dialog addresses print defaults.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Yes, that's it. If I have 5 pages and am not paying attention ( like that EVER happens ) I'll end up sending all the pages to the laser when all I want is the page on the screen.
Brian Robison
MetalMarkers
Epilog Mini
Rabbit 1290
BTDT. Luckily for me there's another step: the laser doesn't start printing until I hit 'Start' on the ULS driver screen...and I can select which page(s) at that step too.
But it will get your attention when what you see on the screen is page 1...and you were working on page 3.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
I use Corel Draw 12 for a lot of graphic work. (I don't have a laser). Most Corel programs are set up about the same so see if this will work in your version. In the screen you have open, go up to the top and select "tools" then "options". On the scroll down menu on the left go to the bottom and select "global". Under that select "printing". When that page opens there should be a box (just below where it says "default print style") that you can check that says "Print only current page by default". Hope yours is the same and that will work for you.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.