Originally Posted by
Matt Meiser
Brian, is there much concern with the pocket hole screw heads pulling through the melamine?
Matt,
I just got though building a melamine outfeed table. (Still have to attach it to the saw. I also built my side table out of melamine. I had no problems with splitting with 3/4 melamine. I spaced my screws every 8-10 inches and 2-3 inches in from the end. All is well.
If the cabinet is fitting between two walls is it a possibility to screw through the sides of the cabinet and then cover the screws?
Jeff Sudmeier
"It's not the quality of the tool being used, it's the skills of the craftsman using the tool that really matter. Unfortunately, I don't have high quality in either"
Reply With Quote