Page 1 of 8 12345 ... LastLast
Results 1 to 15 of 108

Thread: New Years Eve FreeStuff Winners - Universal Laser Systems Personalized Pens

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 12-31-2007, 6:14 PM #1
    Keith Outten's Avatar
    Keith Outten
    Keith Outten is offline [OP] Administrator
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,783

    New Years Eve FreeStuff Winners - Universal Laser Systems Personalized Pens

    Tonight, just after midnight we will draw ten names from those who post in this thread. The winners will receive a maple pen and matching key ring set that will be laser engraved/personalized with their names. Good Luck to everyone and Happy New Year!!!!!

    This is an opt-in FreeStuff Drawing for SawMill Creek Contributors so post here to be eligible for the drawing later tonight.

    The maple pens and matching key rings were donated by Universal Laser Systems.

    http://www.ulsinc.com/index.html

    And the Winners are:

    1. Dave Novak
    2. James Waters
    3. Brent Grooms
    4. Thomas Knighton
    5. Tom Quatsoe
    6. Bruce Pearce
    7. Mike Heaney
    8. Mark Rios
    9. Matt Meiser
    10. Jack Halley

    Congratulations to all our winners!

    Note: All winners please send private messages to Jackie Outten with your shipping address and the names you would like engraved on your prizes
    Attached Images Attached Images
    Last edited by Keith Outten; 12-31-2007 at 6:40 PM.
  3. 12-31-2007, 6:30 PM #2
    Don Bullock's Avatar
    Don Bullock
    Don Bullock is offline Member
    Join Date
    Nov 2006
    Location
    Fallbrook, California
    Posts
    3,562

    Talking

    Happy New Year.
    May 2008 be a great year for all.
    Don Bullock
    Woebgon Bassets
    AKC Championss

    The man who makes no mistakes does not usually make anything.
    -- Edward John Phelps
  4. 12-31-2007, 6:32 PM #3
    Thomas Knighton
    Thomas Knighton is offline Member
    Join Date
    Nov 2007
    Location
    Albany, GA
    Posts
    379
    Happy New Year One and All!

    Tom
    Are you getting something out of your time here? You are? Great...then now's the time to give a little something back! Contribute!
  5. 12-31-2007, 6:33 PM #4
    Shawn Green
    Shawn Green is offline Member
    Join Date
    Sep 2007
    Posts
    10
    Happy New Year!
  6. 12-31-2007, 6:35 PM #5
    Gary Keedwell
    Gary Keedwell is offline Guest
    Join Date
    Oct 2005
    Location
    Plymouth County, Massachusetts
    Posts
    2,933
    Happy New Year...


    Count me in....

    Gary
  7. 12-31-2007, 7:11 PM #6
    Mike Heaney
    Mike Heaney is offline Member
    Join Date
    Dec 2006
    Location
    Mont Vernon, NH
    Posts
    155
    and count me in too

    happy new year all!

    Mike
  8. 12-31-2007, 7:30 PM #7
    Chris Foley's Avatar
    Chris Foley
    Chris Foley is offline Member
    Send a message via Yahoo to Chris Foley
    Join Date
    Sep 2007
    Location
    Pearland, Texas
    Posts
    110
    Happy New Year!

    Yes...that means I want in also!
  9. 12-31-2007, 8:36 PM #8
    Nancy Laird's Avatar
    Nancy Laird
    Nancy Laird is offline Friend of the Creek
    Join Date
    Aug 2006
    Location
    Rio Rancho, NM
    Posts
    2,568
    Me, me, me...

    Happy New Year

    Nancy
    Nancy Laird
    Owner - D&N Specialties, Rio Rancho, New Mexico
    Woodworker, turner, laser engraver; RETIRED!
    Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
    SMC is user supported. http://www.sawmillcreek.org/donate.php
    ___________________________
    It's nice to be important, but it's more important to be nice.
  10. 12-31-2007, 7:39 PM #9
    Thom Sturgill's Avatar
    Thom Sturgill
    Thom Sturgill is offline Member
    Join Date
    Nov 2007
    Location
    Fort Pierce, Florida
    Posts
    3,498
    Happy New Year!!!
    Count me in.
  11. 12-31-2007, 8:12 PM #10
    Doug Rogers
    Doug Rogers is offline Member
    Join Date
    Nov 2006
    Location
    Stewartstown, PA
    Posts
    93
    Count me in !!!
    Happy New Year!!!!

    Doug Rogers
  12. 12-31-2007, 8:56 PM #11
    George Morris's Avatar
    George Morris
    George Morris is offline Contributor
    Join Date
    Jan 2006
    Location
    North central Pa Tioga Co.
    Posts
    701
    Please sign Me up!! Great site!!
  13. 12-31-2007, 9:12 PM #12
    Roger Fournier
    Roger Fournier is offline Member
    Join Date
    Jan 2006
    Location
    NH
    Posts
    36
    Please count me in too........
  14. 12-31-2007, 9:12 PM #13
    Rick Gooden
    Rick Gooden is offline Member
    Join Date
    Dec 2006
    Posts
    272
    I'll have to learn to write if I win. Count me in.
    I do it right, cause I do it twice.
  15. 12-31-2007, 9:13 PM #14
    Mike Henderson's Avatar
    Mike Henderson
    Mike Henderson is offline Contributor
    Join Date
    Apr 2005
    Location
    Villa Park. CA
    Posts
    13,091
    Happy New Year and Good Luck to all.

    Mike
    Go into the world and do well. But more importantly, go into the world and do good.
  16. 12-31-2007, 9:17 PM #15
    Noah Vig's Avatar
    Noah Vig
    Noah Vig is offline Member
    Join Date
    Feb 2007
    Location
    Southern Wisconsin
    Posts
    62
    Count me in too please. Happy New Year.
« Previous Thread | Next Thread »

Similar Threads

  1. Laser Engraving FreeStuff Drawings
    By Keith Outten in forum Laser Engraving General Topics
    Replies: 8
    Last Post: 10-30-2007, 6:12 PM
  2. FreeStuff Winners from CHESTER TOOLWORKS
    By Keith Outten in forum FreeStuff Drawings!
    Replies: 56
    Last Post: 12-16-2006, 2:09 AM
  3. FreeStuff Winner - St Louis Laser Vector Cutting Grid
    By Keith Outten in forum FreeStuff Drawings!
    Replies: 91
    Last Post: 08-29-2006, 10:16 AM
  4. FREEStuff Drawing Fri. 11-5-2004: 4 Wilton MultiGrip Holding Systems
    By Aaron Koehl in forum FreeStuff Drawings!
    Replies: 121
    Last Post: 12-22-2004, 5:27 PM
  5. Bethlehem Olivewood Burls - FreeStuff Winners (June 10, 2004)
    By Aaron Koehl in forum General Woodworking and Power Tools
    Replies: 15
    Last Post: 06-11-2004, 9:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules