I am in the process of setting up some DC. I currently have 6" PVC sch 35. (I couldn't find thin wall 2729 anywhere). I would like to use 6" flex hose to connect to my machines. I am interested in buying the hose from WynnEnvironmental - alot of people have recommended them. I contacted them to verify that their hose (clear PVC - 30 mils, their cheapest hose) would fit the schedule 35 PVC. Their reply was that the inside diameter of their hose is anywhere from 6.02 - 6.06 inches. I then measure the sch 35 PVC - it measures 6.25 inches.

My question to all - Do you think that I can stretch the hose over the PVC ? I really don't want to spend 100$ on hose and have a hard time getting it to fit.

Thanks,

Howie