Woohoo! New tool arrives!

[Steve Kolbe]

Ok, ok! I know it's not as beastly and cool as some of the titanic drum sanders and stationary planers / joiners I've seen people on these forums get, but I am SO exited for this arrival!

I finally got my new scroll saw tonight. I couldn't resist ripping open the box and setting it up already - you know - "to make sure everything is in working order..." (wife rolls her eyes).

After much deliberation and research, I ordered the Dewalt DW788 saw. The reviews were all right on the money. This scroll saw is the quietest darn thing I've ever powered up! WAY quieter than the ones I used when I was younger. No vibration on the table at all either. I am very pleased with this new addition to the family!

Now, if I can just finish up a few projects, I might be able to find time to use the thing...

[Don Bullock]

Congratulations, but where's the picture. No picture --- didn't happen.

[Steve Kolbe]

Congratulations, but where's the picture. No picture --- didn't happen.

[IMG]file:///C:/Documents%20and%20Settings/Axorr/Desktop/P1160038.jpg[/IMG]

...oy... yer makin' me work for this aren't ya!?

here she is. Now, I just need to figure out what to coat the tabletop with.

[CW McClellan]

After I cleaned mine of the grease i used Johnsons Paste wax --scrubbed it in good -let sit a day and buffed --

[Joe Chritz]

[IMG]file:///C:/Documents%20and%20Settings/Axorr/Desktop/P1160038.jpg[/IMG]

...oy... yer makin' me work for this aren't ya!?

here she is. Now, I just need to figure out what to coat the tabletop with.

How about covering it is sawdust?

or paste wax for a start.

Joe