Building a bathroom vanity question

[Craig D Peltier]

I was wondering if anyone here knew of a place where to get risers that lift sink top off the vanity.Its basically the 4 small post? Im looking for ones I can order off the net where theres various options. Rise of maybe 1 inch.
My top is glass, are these usually epoxied on to the glass top and the bottom has a thread in it to secure to top of vanity?

Thanks

[Jamie Buxton]

Doug Mockett sells them. www.mockett.com and look for "stand-offs".

If they're too pricey for you, you can get stand-offs and spacers from McMaster-Carr (www.mcmaster.com) in a variety of materials and dimensions. However, these all have holes through them which you'd see from above the glass.

[Craig D Peltier]

Doug Mockett sells them. www.mockett.com and look for "stand-offs".

If they're too pricey for you, you can get stand-offs and spacers from McMaster-Carr (www.mcmaster.com) in a variety of materials and dimensions. However, these all have holes through them which you'd see from above the glass.

Thanks, it seems like thye can just be made out of pipe.I would like ot have something thats not hollow. The glass is sea glass color you may not see it if its hollow but harder to adhere.