What do you use the right ext on TS for?

[Lee Koepke]

plus, it looks cool

[harry strasil]

don't have extensions on my TS, it shopmade. table is 48" wide or so. have a router mounted under the left side, I use the right side for cutting etc.

[George Summers]

I'm in the middle. My saw has a 30" fence and I was finding that I ocassionally needed 32", 34" or 36" (doors, longer crosscuts with a crosscut sled, etc). I moved my fence rails to the right by 6" so I now have a 36" fence which I find to fit 99.999% of my needs. I still have 6" to the left of the blade for the ocassions that I need to cut on that side.

George

[Mike Goetzke]

Router station / storage cabinet.

[Danny Thompson]

Router and assembly table

[Mike Wilkins]

I use the right side of my Unisaw table for storage of magazines and junk. My next saw will be a slider, so the right side capacity will be minumum (32").
I have rarely used much of the capacity (52") so it becomes useless.

[Dave MacArthur]

52" rails. router table on right, shop vac storage below