Can anyone suggest which clamps might be best to glue up a face frame with mitered corners?
Thanks
Dennis
Can anyone suggest which clamps might be best to glue up a face frame with mitered corners?
Thanks
Dennis
Rich
ALASKANS FOR GLOBAL WARMING
Eagle River Alaska
Ed,
I've seen them...just a different way to do them.
Dennis,
I like Bessey's band clamp for doing such things. It is GREAT to clamp it up dry to see how things fit as Rich alluded to. Google around for the best price.
I would vote for a band clamp.
"A hen is only an egg's way of making another egg".
– Samuel Butler
I like Merle band clamps from MLCS or other places
I used mitered corners on my shop cabinets.
I just like the look if mitered corners.
79713497_dUG6UTLQ_P5200605.jpg
On the face frames that I made with mitered corners I use dowels so it was very easy to clamp up with bar clamps.
As has been stated band clamp would work the best I would say.
I have two different band clamps, they both look a lot alike but there is one big difference in them. The one has spring loaded locks for the band with is much better then the one you have to flip over by hand.
I am a lone ranger(sort've) on this subject, but I really like the Maestro spring clamps for mitered corners.
Another vote for Merle clamps.
For picture frames I use a shop made spider X shape looking thing but a face frame would probably be to big. Maybe a micro pinner to hold the corners together. If it was placed from the top or sides it wouldn't be visible.
I have been thinking about picking up the hot melt polyurethane glue system, it would seem to be good for something like this. Squirt a little in and hold for 30 seconds.
Joe
JC Custom WoodWorks
For best results, try not to do anything stupid.
"So this is how liberty dies...with thunderous applause." - Padmé Amidala "Star Wars III: The Revenge of the Sith"
Hey All,
I am with the Merle guys above.
Here ya go....
http://www.mclswoodworking.com/shops.../merlclmp.html
Per
"all men dream: but not equally. Those who dream by night....wake in the day to find that it was vanity; but the dreamers of the day are dangerous men, for they may act their dream with open eyes, to make it possible."
T.E. Lawrence
I use spring clamps from collins tool, and reinforce the joint with a biscuit.
Clam Clamps - these are the BEST, IMHO, for miters!
http://www.miterclamp.com/
Great right ups on the web about them. I have two, used for trimming doors.
No affiliation - just satisfied. I read about them on Gary Katz's site.
- Rob
oops ....1,2,3,4,5,6,7,8,9,10 - yup all there, whew!