I am always looking over the features and specs of new laser engravers, looking for the perfect laser. I have a list of desired features I'll share.

1) Place and engrave red dot pointer.

2) 100 watts of air cooled power.

3) .001" cutting kerf or finer with a 1/32" or better depth of focus.

4) 24" or wider table with feed through doors.

5) internal light to illuminate work

6) Focus lens protected inside air assist nozzle assembly

7) Solinoid activated air assist with the type of valve that the air can be toggled from nozzle to exhaust, so moisture can't build up from compressing the air.

8) Soilinoid controlled dust sweepback that toggles as above.

9) Encoder equipt servo motors instead of stepper motors for motion.

10) Laser reflected auto focus instead of mechanical plunger autofocus.

11) Internal software for alignments, calibrations, and tests, including a 3 point autofocus table leveling script.

12) Quick change electronics components and laser head behind an easy access cover.

13) Electronics and laser compartments isolated from dust entry.

14) Flat work area cover with gas piston assisted hinges, that is sized such that a replacement can be cut on the machine itself in case it breaks or is scratched up.

15) Software files included for cutting spare parts like the lid, home flags, lens cover shrouds, etc.

What is your list of feature features for the perfect engraver?