I bought the reversing switch for my lathe ( JET 1236 ) but have no idea how to hook it up. The only wires I can get to is at the capacitor. There is no plate on the motor to get to where the power cord is hooked up. This is the drawing for single phase hookup. Do the wires from #3 & #4 connectors come from the capacitor? If so, what wire gets hooked up to the lead going out ( at the bottom ) and what wire goes to connector #2? Anyone hook one of these things up and can tell me how to do it? Have pic's maybe??? All help will definitely be appreciated!!
Thanks,
Joe