I need a 28" Drawer Slide - Ideas?

[Samuel Brooks]

I have found several people that I can order from, Woodcraft, Rocker etc. but they want 40 dollars and I need two sets. I can purchase a 24" from Menards for $8.99. For a shop cabinet, I am having a hard time justifying
the extra $62.00. Even though it is a shop project .

I was thinking of mounting the 24" drawer side two a sliding dovetail that would go in the side of the cabinet. The sliding Dovetail would then have a pin to keep it from coming out more then 4" to get my full 28". Has anyone done this?

Thanks for the comments.

[Karl Brogger]

If side mounts are OK, KV8400's come in 28" lengths. I pay $9.38 a set through a local supplier.

[Kevin Groenke]

We installed ~1000pr of CompX slides from WWHardware last year, no problems reported. These slides are pretty indistinguishable from KV's or Accurides. 28" slides are $9.11/pr.
http://wwhardware.com/catalog.cfm/Gr...ll%20Extension


There's a couple reputable sellers on ebay, looks like you could get 2 pr shipped for less the $40.

http://cgi.ebay.com/28-Full-Extensio...QQcmdZViewItem
http://cgi.ebay.com/New-Pair-100lbs-...QQcmdZViewItem


-kg

[Samuel Brooks]

Thanks for the links. Looks like ordering will be the best way. At $10 each, I am ok with buying.