Ok looking at different types of maple for the kitchen cabinets.
Wow are there are quite a few.
Is soft maple really soft?
What maple do you suggest?
Ok looking at different types of maple for the kitchen cabinets.
Wow are there are quite a few.
Is soft maple really soft?
What maple do you suggest?
Always do right. This will gratify some people and astonish the rest. Mark Twain
No, soft maple is not "soft"...it's more of a designation of certain types of maple. It's "softer" than hard maple, but that would sometimes be splitting hairs. Much of the highly figured maple is also soft maple.
--
The most expensive tool is the one you buy "cheaply" and often...
Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....
Greg, search the forum for "soft maple" and you'll find a few threads that talk about the differences. I usually search using google. Type "soft maple site:sawmillcreek.org" in the google search box.
I just recently had the same question and found those threads very useful. In particular, one post pointed me to the Janka Hardness scale which provides relative hardness comparisons amongst various types of wood. It was very enlighting to this newbie. Google "Janka Hardness Scale" and you'll find several useful charts and tables.
Good luck!
Soft maple is an idea wood for painted cabinetry. It is quite a bit harder than poplar, not that much more expensive, and takes paint very well.
If you are familiar with the Janka hardness scale, heres a few figures for comparison:
Hard maple 1450
Soft Maple 950
Cherry 950
Southern Yellow Pine 870
So it's considerably softer than hard or sugar maple, about the same as cherry, but harder than the hardest pine (SYP).
Yellow Poplar is around 540 IIRC.
Mesquite is around 2200!!
Greg, what's hard and what's soft? Roger mentioned the Janka Hardness scale. It's probably the best thing to use as a comparison. Here's a link for one:
http://www.sizes.com/units/janka.htm
It gives an explanation of how the hardnesses are derived and lists a lot of wood species, and probably most of the commonly used ones. I don't think hard and soft maples are common names but loosely used categories. Also be aware that wood is a natural product and sometimes Mother Nature doesn't use a lot of quality control.
I was going to say "about the same as cherry" until I read through all of the posts. I just got done using some for my drawer interiors (face is walnut) and it is wonderful to work with (the proverbial, not too soft, not too hard), closed grain, nice to finish/sand. It really is quite nice to work with.Originally Posted by Greg [LEFT
My dad and I had never used any (typically use poplar for our drawers) until we bought 500 bf of it (4/4 kiln dried) for around $400 last winter. It is so clear and nice, with reasonable dimensions (i.e., nice wide boards) that we barely waste any and have used up a fair bit of it at this point.
Regards,
Rich
I've used a paint grade soft maple for drawers a couple of times for people wanting a more rustic look to their drawers. It machines very nicely, sands up well and isn't hell on tools like maple is. I stopped selling maple drawers because it chewed up the dovetail bits so quickly and we spent so much time sanding. I use a birch that has alot of fleck in it now. Much cheaper than maple or clear birch, but a bit more than soft maple.