Results 1 to 3 of 3

Thread: finishes

  1. #1

    Cool finishes

    Hi, I would like to know which finish do you prefer oil or water based? I know that oil based has a lot of odor. Thank you.

  2. #2
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,943
    Other than on some turnings, I do not use any oil based finishes. I use water borne products from Target Coatings when I'm spraying and shellac; the latter I both spray and brush.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    Join Date
    Feb 2007
    Location
    Omaha, Nebraska
    Posts
    191
    Depends on the season.

    During warmer months, I usually spray on Target USL in a protected area outside. During the colder months I'll finish inside and usually use a wipe-on oil/varnish mix. They both work well.

Similar Threads

  1. What finish for food use?
    By Dale Gregory in forum Turner's Forum
    Replies: 16
    Last Post: 03-03-2008, 7:21 PM
  2. HVLP-Separate Guns for Latex and Other Finishes?
    By John Russell in forum Project Finishing
    Replies: 2
    Last Post: 04-29-2007, 12:17 AM
  3. Food safe finishes
    By Doug Ketellapper in forum Project Finishing
    Replies: 24
    Last Post: 03-21-2006, 1:32 PM
  4. Water Based Finishes
    By Matt Meiser in forum General Woodworking and Power Tools
    Replies: 10
    Last Post: 01-11-2005, 6:37 PM
  5. Salad Bowl Finishes
    By Mark Rios in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 04-25-2004, 7:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •