Excellent job Chris.
Looks awsome hanging off the end, nice outpost too.
Platter looks great with your son sitting in it.
Excellent job Chris.
Looks awsome hanging off the end, nice outpost too.
Platter looks great with your son sitting in it.
Remember, you are NOT your post count.
American & Proud
~Powermatic 3520B~
"The GOLDStandard since 1921"
Graphtec CE5000-60, FlexiSIGN PRO 8.6v2, Refine MH871,
Photoshop CS5 Extended, Illustrator CS5, CorelDRAW X4, Wacom Intuos3 6x11, Wacom Cintiq, Dual 24" LCD's on MoView Stand, GraphixCALC Pro 2.0.4, QuickBooks 2010, Grain Fraim.
i thought about going
my dads business is closing and we have to start getting stuff out (long story
it is adjustable the bend that hooks to the pipe on the lathe is 1-1/4" which slides over the 1" pipe
the whole thing is based on the info that was in the winter 2008 issue of wood turning design
pine is fun to turn
this is done from 1 2x4
it has been sold already though (got good money for it
That is absolutely great! Gotta love those "dare's", they tend to push you to or over the limit.
Officially Retired!!!!!!!! Woo-Hoo!!!
1,036 miles NW of Keith Burns
dares are great
they expand your ideas
and drive you insane
the bad part of the outboard rest is i can still go bigger than that one
i believe it will max out around 41"-42"
i will not be making anything that large yet
I'm pretty sure of the production time on the one piece, but how bout the other?
Bob
obviously the laminated piece was "quick" the other piece (normal segmented work) was not all that bad
i did that as 2 halves and then glued them together
I think if you give it time the finish will improve just from all the diaper polishing being applied. ;-)
Amazing piece!
GK
thanks guys
the out board turig rest is a great project
the big bowl was really kind of fun
Both pieces are awesome. Never thought a 2x4 could look so good.