Eiffel Tower

[Brian J Rogalny]

I am trying to do the tower that was posted here a while ago, but I am having trouble resizing it for a 12"x24" table. It looks like a long burn time on a 30 watt universal.

[Scott Shepherd]

What's the problem you're having? It is a long burn time on any laser. It's one heck of a lot of small vector cuts.

[Brian J Rogalny]

I can't seem to arrange in regular size to fit my table.

[Howard Garner]

Keep searching the Creek
It was also posted to fit the 12 x 24 lasers

[Ed Maloney]

Brian - I have a 12x24 layout. Let me know if you want it or just search for postings with my name. It's broken out into layers so you have to cut each one at a time. Also - It does take a long time a little under 2 hours not counting popping all the small pieces out.

[Brian J Rogalny]

checked them all can't find it.

[Steve Eide]

I think this is what you are referring to.
http://www.sawmillcreek.org/files/neweiffel_12.cdr

[Ed Maloney]

Here's the cleaned up version for a 12x24.

[Brian J Rogalny]

Here's the cleaned up version for a 12x24.

I didn't see the attachment Ed

[Peter Meacham]

Brian

I think this is the link - looks like a zipped file

http://sawmillcreek.org/attachment.p...7&d=1187955728

Pete

[Brian J Rogalny]

Cannot Open This File

[Ed Maloney]

Peter - Yep that's the file. (We just got a new Irish Setter puppy and I get distracted now.)

Brian - If you are still having problems I'll send the file to you.