Results 1 to 5 of 5

Thread: HD clearance- (2) Mapp gas w/trigger

  1. #1
    Join Date
    Feb 2003
    Location
    Huntsville, AL
    Posts
    79

    HD clearance- (2) Mapp gas w/trigger

    My Home Depot has (2) Mapp gas tanks with the push button trigger igniter on clearance for $10. They were $50. I found them by the welders.

  2. #2
    Join Date
    Mar 2007
    Location
    Tidewater, VA
    Posts
    273

    caveat emptor

    Research fuel availability before buying.
    I am not expert on this topic, but have the following from a discussion in a welding class, reinforced by a cursory web search.
    MAPP production will shortly stop (might have stopped already). Petromont is/was the North American producer. Worthington Cylinder was a big distributor.
    There are alternative fuels (Worthington has announced it is distributing one), but the hitch is whether MAPP equipment will be optimal for it.
    So...this could be a raging good deal, or it might be a dud. Depends on the fuel issue.

    Bob

  3. #3
    Join Date
    Oct 2007
    Location
    Arlington, VA
    Posts
    1,850
    For $10 for two, seems like this is sort of disposable technology...

  4. #4
    Some of the small torches run either MAPP, or propane. I have one of these torches from ACE that runs propane. I'm on my third free replacement one. IF I bought it under the Bernz O Matic Brand, I would only have gotten a one year gaurantee

  5. #5
    Join Date
    Feb 2003
    Location
    Huntsville, AL
    Posts
    79
    as suggested this kit is disposable. Here is a link for a better explanation.

    http://www.bernzomatic.com/bernzomat...rnzoProd100012

    I use the kit for sweating copper pipes.

Similar Threads

  1. DeWalt DW618 3 base kit on clearance?
    By Louis Brandt in forum General Woodworking and Power Tools
    Replies: 15
    Last Post: 10-17-2007, 9:06 PM
  2. Delta Hybrid Saw (Model 36-714) Zero Clearance Insert?
    By Brady Meltzer in forum General Woodworking and Power Tools
    Replies: 4
    Last Post: 08-09-2007, 12:47 AM
  3. minimal clearance angle
    By Jasper Homminga in forum Neanderthal Haven
    Replies: 8
    Last Post: 12-07-2005, 8:25 PM
  4. Zero clearance insert for a Unisaw with splitter?
    By Frankie Hunt in forum General Woodworking and Power Tools
    Replies: 8
    Last Post: 07-21-2005, 10:20 PM
  5. Lowes clearance pricing mystery
    By Herb Kelley in forum General Woodworking and Power Tools
    Replies: 4
    Last Post: 04-16-2004, 9:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •