Results 1 to 3 of 3

Thread: Blue Sanding Discs

  1. #1

    Blue Sanding Discs

    About 6 Months ago, I bought some blue discs from a man in Cincinnati or close by. For reeorder was directed to a Vincent Welch at a website www.vinceswoodenwonders.com. That worked fine but now neither the site or the e-mail address for him work. And I've mislaid the contact for the man in Cincinnati.

    The discs (which are super) range from 60 - 2000 grit and are flocked on the back for H&L. The lower grits are on very thin fabric, the higher ones may be film. The only ID marks on them are the letters DEER.

    Any one know of the Cincinnati address or of a contact where sheet stock might be available?

    Will Hunt

  2. #2
    Join Date
    Jul 2007
    Location
    Marietta, GA
    Posts
    621
    Take out the second 'e' in your link, or Google Vince's Wood N Wonders
    Steve \o/
    Dynamite With A Laser Beam LLC
    Epilog Helix 75W/Epilog Fusion Edge 80W and Jet 1642-EVS2

  3. #3
    Quote Originally Posted by Will Hunt View Post
    About 6 Months ago, I bought some blue discs from a man in Cincinnati or close by. For reeorder was directed to a Vincent Welch at a website www.vinceswoodenwonders.com. That worked fine but now neither the site or the e-mail address for him work. And I've mislaid the contact for the man in Cincinnati.

    The discs (which are super) range from 60 - 2000 grit and are flocked on the back for H&L. The lower grits are on very thin fabric, the higher ones may be film. The only ID marks on them are the letters DEER.

    Any one know of the Cincinnati address or of a contact where sheet stock might be available?

    Will Hunt
    http://www.vinceswoodnwonders.com/

    Try that one, just worked for me.
    He has great stuff and wonderful customer service!
    Change One Thing

Similar Threads

  1. Sanding discs - Is it my imagination
    By Mike Turner in forum General Woodworking and Power Tools
    Replies: 10
    Last Post: 08-23-2006, 12:04 AM
  2. Sanding discs
    By Dan Oelke in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 08-17-2006, 11:32 PM
  3. 2" sanding discs
    By joe zarnitz in forum Turner's Forum
    Replies: 3
    Last Post: 06-03-2006, 12:00 PM
  4. Porter Cable Sanding Discs
    By Jim Baker in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 09-12-2003, 5:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •