I called Beall but they couldn't tell me the thread count on their 3" bowl buffs, also how long is the bolt? I was told they're 3/8" but nothing else.
Thanks!
Fred
I called Beall but they couldn't tell me the thread count on their 3" bowl buffs, also how long is the bolt? I was told they're 3/8" but nothing else.
Thanks!
Fred
Last edited by Fred Conte; 04-23-2008 at 2:59 PM. Reason: Typos
3/8" x 16 TPI
...and I just talked to someone at Beall a week ago that knew the answer.
Not sure about bolt length off hand, but I can check.
I am in the process of making a knockoff of the Beall system and have a Beall Morse headstock adapter.
The bolts I bought were 3/8-16 and they fit the Beall adapter.
Clem
Thank you for the info, I made a stand alone buffer and need to drill and tap the aluminum extension but didn't know the tap size and depth I should go.
DSCN0173.JPG