I have something weird happening on a test piece of eucalyptus:
The piece is BLO'd, then shellac'd, then coated with about 4 coats of Waterlox.
The day after applying the last coat of waterlox, I left the piece on my dashboard. At noon, the next day, The waterlox has bubbled and separated from the wood in random places.
It was sunny, and I'm guessing the dash was probably about 130-160 degrees F.
PLEASE tell me that the waterlox can do this if heated before properly cured. PLEASE don't tell me that waterlox is incompatible with WAXED shellac, which is what I used, and that heat just accellerated what's gonna happen to the rest of my piece.
Shawn.
What happened.