I am getting a double image from my versalaser 30Wt. When I had the problem before it was always something slipping in the drive train, belt loose, drive gear loose, etc. I have replaced the belt, cleaned and tightened all the gears etc. and the problem has not changed. Is there something I am missing. Help. Yes I know tech support will be open Mon AM but I need to get work out today, I should have called them Fri. But I figured it was no biggie, just readjust the belt and back to work. It's now been 2 days of this and I am hoping for some advice.
Thanks guys (and gals)