Results 1 to 4 of 4

Thread: Matrix/Vibe owners?

  1. #1

    Matrix/Vibe owners?

    Anyone has either of these 2 cars? Opinions?
    How about from a WW point of view? Could I stick some 8-10 foot rough lumber inside and drive with the trunk open?
    Roof rack a good idea?
    TIA

  2. #2
    Join Date
    Mar 2003
    Location
    Monroe, MI
    Posts
    11,896
    Brian, I don't own one, but where I used to work (a GM supplier) there were a couple people that had them. I can't give you any details, but overall they really liked them.


  3. #3
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,915
    I've driven them as a rental. They were not bad, but were less roomy inside than Professor Dr. SWMBO's Prius. I don't know that you'd get too much 8-10' material on the inside, but with a roof rack you could carry a few boards with no problem. A small utility trailer might be a good choice for more than very incidental hauling of woodworking materials.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  4. #4
    Join Date
    Sep 2003
    Location
    Toledo, Ohio
    Posts
    55

    I own an 07 Vibe

    I bought mine last summer. I've carried 150 bf of rough sawn oak (7 foot boards) home with the hatch closed. The back seats and front passenger seat fold flat to allow for lengths up to about 7 or 8 feet long to fit. If you wanted to go longer, you could open the glass (not the entire hatch) and have it hanging out the back a few feet.

    I will warn you that I haven't been really happy with the ride quality. I drive 65 miles to work (all highway) and the vibe seems to have a really stiff suspension and the road noise can be an issue for some people.

Similar Threads

  1. Nova DVR XP Owners...
    By Mike A. Smith in forum Turner's Forum
    Replies: 15
    Last Post: 12-28-2007, 11:01 AM
  2. Worksharp ws3000 owners?
    By richard poitras in forum General Woodworking and Power Tools
    Replies: 1
    Last Post: 12-02-2007, 8:01 PM
  3. Minimax MM20 and Laguna LT20 Owners
    By Adam Grills in forum General Woodworking and Power Tools
    Replies: 16
    Last Post: 02-26-2007, 10:15 AM
  4. To all 6" jointer owners -
    By Rick Schubert in forum General Woodworking and Power Tools
    Replies: 33
    Last Post: 06-23-2005, 10:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •