Hi,
First post here. I hope this is in the correct category. I have been commissioned to build a bed to match an existing bedroom set. The set is from Canada, and is more or less a Queen Anne or Chippendale sort of design.
The corners of the case pieces have this detail, and the client wants me to duplicate it on the bedposts. I don't know what it's called. I also have never done this particular feature before, and while I have some ideas on how to construct a jig to do the chamfer on the bandsaw and also the three-bead detail in the chamfer (with a molding head on the table saw), I hesitate to reinvent the wheel. Can anyone offer any suggestions for how this might be accomplished? Thanx!
I hope the attachment is there!
mike keers