Hi I have a client that Wants to Laser engrave tampered Glass. Is that Possible? did anybody try it before?
I own an Epilog Mini 35 watts
Zeev Goldin
[OP]
Member
Hi I have a client that Wants to Laser engrave tampered Glass. Is that Possible? did anybody try it before?
I own an Epilog Mini 35 watts
Zeev Goldin
Zeev Goldin Engraving solutions
Moderator
Yes, I have done it without any issues. Just so they know, it technically reduces the quality of the glass, since you are using the laser to product tiny fractures. Shouldn't be a problem, but you might want to cover that to protect yourself.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Posting Permissions
Reply With Quote