This is my second green turning. It was in the DNA for 48 hours and wrapped for 9-10 days in a paper sack. It is Walnut from behind the house, that I felled in March after an Ice storm. It did better in the DNA than the Heritage Birch HF that cracked and split so bad, that I showed last week. I took every ones advice though, and epoxied w/coffee all the cracks (and there were plenty of them.) I will post pictures when it is finished. This one is 6" diameter and 4-1/2" tall. It has 4 coats of Tung Oil. I then went to work with my New Beall Buffing system, I received today. I sure like the results on the finish with the Beall. I've a lot to learn, but it sure is additive.....