Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 31

Thread: Hickory- your opinions??

  1. #16
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Quote Originally Posted by Jim Becker View Post
    Realistically, a lot of commercial, off the shelf cabinets and those that use doors supplied by "door specialists" often have a lot of glued up narrow boards no matter what the species, many times without thought to grain and color matching. This is one of the reasons that I might buy carcasses and drawer boxes to save time if necessary, but will still build my own doors, drawer fronts and face frames...attention to grain and color is important to me.
    Jim. Fully agree. That's why i'm a little concerned. He appears to be a quality builder but the cabinet fronts are to me "out of step". This is to be a weekend place but I would want to change some of the trim and cabinet faces eventually. Thanks.
    Jerry

  2. #17
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,664
    Blog Entries
    1
    Hickory is an extremely durable wood. You can use it to make furniture. I have an entire bedroom suite made from hickory and it is all the same color!

    sorry for the poor image quality.

    Hickory easily accepts stains, but will not get really dark in color from them. Hickory also does not have to have the wide color range so often seen in the cheap cabinets at the home centers. Hickory grown in the woods is much different than field grown trees, far fewer knots and less color variation. I have over 500 bdft in my garage of rough cut hickory that is furniture grade wood with few if any knots. It was purchased for a kitchen project that ended up getting done another way, so the wood is for sale if someone makes the right offer.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  3. #18
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Thanks, Lee. Wish my cabinets looked that good...Nice work. For me, its just a little more challenging to finish hickory vs others. Thanks.
    Jerry

  4. #19
    Join Date
    Jun 2004
    Location
    Water Park Capital of the World
    Posts
    2,219
    Jerry, Jerry, Jerry!!!

    You'll have to take a drive up this way and see hickory floors and cabinets in person.

    If you recall, I had all my floors, save for the kitchen, done in 3/4" hickory and my kitchen cabinets are done in hickory also. I like the different shades hickory gives and the lightness of the wood. Coming up on 2-1/2 years now and still looking good.

    So there's a good reason to visit, eh?

    Karl
    Creeker Visits. They're the best.

  5. I stood up a sample piece I had planed earlier after wiping a little danish oil on it. You can see from the other 2 pieces, the one in the foreground is almost all dark, and the one on the left is almost all light. The piece with the danish oil unfortunately has some black stain in the lighter areas, not exactly the pick of the litter if you know what I mean. The problem is that the light colored area has a yellowish hue, or at least an unusual tan to it. I placed a piece next to some wood I was using for a cedar clad room, and it didn't feel right as a color mix. I have a lot of chocolate boards that are the darker shade, about 12" wide, all the way through. I usually like the contrasts, but I am considering using all dark. I'm not a big fan of staining unless it is necessary. I like to choose the color of the wood to match the shade that I want, and allow the subtle color nuances to shine through. That is one of the stacks of Hickory behind it, and they are wide boards. At the very top of the stack is some cedar so ignore that.


    Last edited by Bob Feeser; 09-08-2008 at 11:36 PM.
    "Fine is the artist who loves his tools as well as his work."

  6. #21
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Quote Originally Posted by Karl Laustrup View Post
    Jerry, Jerry, Jerry!!!

    You'll have to take a drive up this way and see hickory floors and cabinets in person.

    If you recall, I had all my floors, save for the kitchen, done in 3/4" hickory and my kitchen cabinets are done in hickory also. I like the different shades hickory gives and the lightness of the wood. Coming up on 2-1/2 years now and still looking good.

    So there's a good reason to visit, eh?

    Karl

    Karl, my friend, you're right. We should get together even if to discuss hickory cabinets. I'll try to dig up your old thread on building your home ans see how you handled it. Thanks Karl..
    Jerry

  7. #22
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Bob, WOW, you have a ton of hickory and looks like nice stock. Thanks for showing the difference between boards, That's what surprised me when the builder sent me pictures of parts of the house. We'll know better when I actually visit there in a few weeks. thanks, Bob
    Jerry

  8. #23
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Lee, how did you get your finished pieces to be so uniform in grain/color? Was it cutting around darker grain or your finishing method or?? Thanks Lee.
    Jerry

  9. #24
    Well Jerry, if you don't like the hickory, I can make you a good deal on some Cherry shorts.

  10. #25
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Quote Originally Posted by Lars Thomas View Post
    Well Jerry, if you don't like the hickory, I can make you a good deal on some Cherry shorts.
    '

    Yes, Lars, I know @ $5.00/ft. Funny I'm building now a cherry wall cabinet for Laundry room and could've used those shorts I gave away. Only kidding. Good to hear from you.
    Jerry

  11. #26
    Join Date
    May 2007
    Location
    Colorado Springs
    Posts
    2,757
    I recently resumed my very-long-in-the-tooth workbench project. The top is hickory. I haven't found it too difficult to work with. But it is hard. Aye, sir! It's hard, sir!

  12. Quote Originally Posted by Pat Germain View Post
    I recently resumed my very-long-in-the-tooth workbench project. The top is hickory. I haven't found it too difficult to work with. But it is hard. Aye, sir! It's hard, sir!
    Pat,
    I agree. My impression of it is that it is rock hard, dense, and heavy. Bob
    "Fine is the artist who loves his tools as well as his work."

  13. #28
    My sister in law has just had hickory cabinets installed in her cabin. They show the extremes of color variation that everyone here notes but it fits well with the pine log interior. She wants a large informal dining room table of hickory with a corian top to match the cabinets. I have checked Hearnes, Wehrung's and Woodworkers Source for 12/4 hickory to be used as leg stock but can only find 4/4. Am I not looking hard enough or is there some trait that makes sawing thick pieces impractical? Maybe the bark inclusions?

    Steve

  14. #29
    Join Date
    Sep 2007
    Location
    Upstate NY
    Posts
    3,789
    Functionally it is great. Extremely hard an resilient. The appearance is a matter of taste; you either like it or you don't.

    A friend has hickory kitchen cabinets, and I think they look bizarre.
    OTOH, I just made a large hickory cabinet and took great pains to match all the panels. It is striking; which is what I was going for.

  15. #30
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    As a followup, I did visit and view that property. The Hickory cabs looked v good in a this natural new log cabin setting. The builder exhibits much skill and craftmnship. The hickory floors were also excellent! For other reasons, I will not be purchasing but I can see how Hickory can work well in cabs in a proper setting...I'm a believer..
    Jerry

Similar Threads

  1. Pitch on Hickory Golf Club Shafts
    By Todd Burch in forum General Woodworking and Power Tools
    Replies: 1
    Last Post: 03-23-2016, 10:51 PM
  2. HF #7, Hickory & My Gloat of All Gloats
    By BILL DONAHUE in forum Turner's Forum
    Replies: 15
    Last Post: 04-29-2008, 9:38 PM
  3. Hickory Hangover?
    By Christopher K. Hartley in forum Turner's Forum
    Replies: 13
    Last Post: 01-06-2007, 11:25 AM
  4. White Oak or Hickory flooring in a bathroom?
    By John Kendall in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 10-11-2006, 3:06 AM
  5. Walnut and Hickory bowl
    By Dominic Greco in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 09-15-2003, 9:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •