Kreg Klamp Trak

[Mike Heidrick]

Mike.... Here's the pic of the Vise grip form Mac ,There product # is LP-HD11. They are identical to the Kreg Klamps . also they are listed on Ebay
item #200251262525
Nice looking tools you won also congratulations

OK, Here is the other info we need. You can call Kreg at 1-800-447-8638 and order part number NK7568. It is $2.56 and includes the round head screw for the bottom of the clamp, the nylon glide sticker for the bottom of the clamp, and the rubber cover for the head of the clamp. Thanks again Robyn for the clamp info.

[glenn bradley]

Back when Phil Adams was alive (owner of Jointech), I would call after hours and brainstorm on different jigs I was thinking of building. Several times he either fabricated or custom cut a part to match what I was looking for. The deal was I had to send a picture.

This is how right thinking customers not only satisfy their customers, it can be a great source for new product ideas.

Jim

I hope Kreg farms out that rail and that they only receive it at their sites in shorter lengths. If they actually have it longer and won't sell it simply because they don't know how (don't have a code or transaction for it) that would be sad.

I would be tempted to call back and ask where they get it since they don't have any longer pieces to sell you. I guarantee you it isn't manufactured their length so somebody's got it. I'll bet you don't even care if its blue.

[Chris Padilla]

Glenn, Glenn, Glenn!! It's GOT to be blue, Man...gotta be!!! haha

[Mike Heidrick]

I hope Kreg farms out that rail and that they only receive it at their sites in shorter lengths. If they actually have it longer and won't sell it simply because they don't know how (don't have a code or transaction for it) that would be sad.

I would be tempted to call back and ask where they get it since they don't have any longer pieces to sell you. I guarantee you it isn't manufactured their length so somebody's got it. I'll bet you don't even care if its blue.

I was told today that they receive it from someone else (guy thought I was asking about the track not the clamp). I should have asked more questions about the track.

[Greg Portland]

Reviving an old thread...

What 8020 extrusion is recommended for use with Kreg Klamps (10S, 30S, ???)?

[Matt Meiser]

Not sure about the clamps fitting--I'd think any would work--but I don't believe that any of the 80/20 extrusions are the same width as the Kreg extrusions. This matters if you want to use the spacers that are part of the Kreg system that rotate different ways to center the clamps on the stock.

I sprang for the Kreg track and while it was expensive, I'm happy with the result.