Sorry I haven't been around much. I havent turned in a while but I needed an ash tray for my cigars so I made these. I like the round one myself. Not quite as crazy as I usually get but I was glad to get in front of the lathe again finally.
[OP]
Contributor
Sorry I haven't been around much. I havent turned in a while but I needed an ash tray for my cigars so I made these. I like the round one myself. Not quite as crazy as I usually get but I was glad to get in front of the lathe again finally.
What you listen to is your business....what you hear is ours.
Member
I don't know, Bill - I only see one segment in each of those!
Welcome back!
Steve \o/Dynamite With A Laser Beam LLC
Epilog Helix 75W/Epilog Fusion Edge 80W and Jet 1642-EVS2
Member
Bill beautiful ashtrays!
Also, you just gave me a great idea for a x-mas present for my BIL....what kind of finish do you have on those?
Contributor
Beautiful ash trays Bill. Good to see ya back.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Moderator
Welcome back Bill! Very nice looking ashtrays! I actually like the square one better! Good to have you back!
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
Member
yes, but not one bad glue joint!Originally Posted by Steve Busey
I don't know, Bill - I only see one segment in each of those!
Welcome back!
Just cut off the parts that don't look like a bowl...
[OP]
Contributor
I've been busy with 2 businesses and building humidors. I'm trying to come up for air.I miss you guys.
What you listen to is your business....what you hear is ours.
Member
Hey Bill, you going to DWR?
Member
Glad to see you back Bill. Nice ash tray's.
Alan
[OP]
Contributor
At this point I probably won't have the time. When is it anyway? Sometimes I go to Phoenix to pick up inventory. If I can combine trips I'll make it happen.
What you listen to is your business....what you hear is ours.
Member
nice looking ashtrays there. I'm like you, trying to get back in front of the lathe and back here after a forced hiatus. Good to see you have not lost your touch. Look foreward to seeing more stuff from you soon.
Be a mentor, it's so much more fun throwing someone else into the vortex, than swirling it alone!
Member
Well Bill, here is what I came up for my BIL for his x-mas present. Thanks again for the idea!
Member
Hey Bill, nice to see you posting again. Im a huge fan of your work and cant wait to see some more. Nice job on the stoagie trays!!
If at first you don't succeed, look in the trash for the instructions.
[OP]
Contributor
Thanks guys. I've posted some segmented trays now too. There here somewhere. Nice gift for the BIL too.
What you listen to is your business....what you hear is ours.
Moderator
Good to see you around again Bill.!!! Wur U been? Never mind....but you did post some nice turnings there. Beautiful work.
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.
Posting Permissions
Reply With Quote