Charlotte, NC lumber

[terry sanders]

Hey Guys,
I am just returning to woodworking after being on the road for 3 yrs. My hardwood lumber company has since closed and wonder if any of you can provide sources near Charlotte? thx
terry

[Charles Lent]

The Wurth Group (former Charlotte Hardwood Center) is on Golf Acres Drive just off Wilkinson Blvd. in Charlotte is probably the largest supplier in the area. They carry domestic and imported hardwoods, and a large selection of plywood.

In Concord, Klutz Lumber, near the hospital, carries the more common American hardwoods like oak, poplar, soft maple, etc. but only in 3/4 f3s.

Charley

[David Keller NC]

Well, it's not exactly around the corner, but if you're looking for a fair amount of lumber, Steve Wall in Mayodan is the place to go. Usually nice stuff (depends on the species - call Steve ahead of time), and rock-bottom prices:

http://www.walllumber.com/default.asp

[Fred Hargis]

Well, it's not exactly around the corner, but if you're looking for a fair amount of lumber, Steve Wall in Mayodan is the place to go. Usually nice stuff (depends on the species - call Steve ahead of time), and rock-bottom prices:

http://www.walllumber.com/default.asp

I've had wood shipped by Steve wall, he runs a top notch outfit, great prices and service. If there is anyway you can get there, he would be a great choice.

[Dan Bowman]

This list is from NCwoodworker.net:

Catawba Hardwoods - Hickory Warehouse
Intersection of Hwy 321 & Hwy 70
Contact info: Call Daniel (cell phone) 828-460-6430

Century Forest Products, Inc.
7600-A Boeing Drive
Greensboro, N.C. 27409-9046
Ph: 336-665-9939
Fax: 336-665-9943
Toll Free: 1-866-655-9939

Charlotte Hardwood Center
4250 Golf Acres Drive
Charlotte, North Carolina 28208
Phone: 704-394-9479
Toll Free: 1-800-868-0291
Fax: 704-398-2162

Kyle Edwards
5048 Reinhardt Circle
Iron Station, NC
(704)258-8985
Only available on Saturday's. Please call to make sure I am there.
Edwards Sawmill
kedwards@sawmillnc.com

H&W Custom Cut Lumber & Mobile Sawmill
10800 Waxhaw Hwy,
Waxhaw NC 28173
Drive in's welcome on Saturdays ONLY
All others Please call to setup an appointment
Call Today 980-721-7954
H&W Custom Cut Lumber

The Hardwood store of North Carolina
106 V East Railroad Ave
Gibsonville, NC 27249
Phone: 1-888-445-7335
http://www.hardwoodstore.com
Reviews


InternetLumber.com, LLC
192 Industrial Blvd
Mocksville, NC 27028
877-769-5747
http://www.internetlumber.com


McEwen Lumber Company - High Point
Division of Hood Industries
5037 Prospect Street
High Point, NC 27263
336-472-1677
Map: McEwen Lumber - High Point

Steve Wall Lumber Co.
P.O. Box 287
Mayodan, NC 27027
Phone: 336-427-0637
Toll Free: 1-800-633-4062
Fax: 336-427-7588
wood@walllumber.com
walllumber.com

Jayakas Wood Turning, LLC.
908 Old Thomasville Road,
High Point, NC 27260
Phone: (336)886-6439
Fax: (336)886-6462
Toll-free: 1-888-886-7119
website: www.bingltd.com

The Moulding Source, Inc.
184 Azalea Road
Mooresville, NC 28115
Hardwoods, Softwoods, Lumber,
Custom & Stock Mouldings & Flooring
Telephone 704.658.1111
www.themouldingsource.com

[Robert LaPlaca]

Unfortunately, Kyle Edwards is not in business anymore (i have bought from him). Charlotte Hardwood (aka. Wurth) is mostly a sheet goods supplier. H & W looks interesting..

I buy 99% of my lumber from either Groff and Groff or Hearne in Pa..

[Thomas Knighton]

Well, it's not exactly around the corner, but if you're looking for a fair amount of lumber, Steve Wall in Mayodan is the place to go. Usually nice stuff (depends on the species - call Steve ahead of time), and rock-bottom prices:

http://www.walllumber.com/default.asp

Thanks for sharing that site. I might have to make a couple of orders from him since the shipping down my way isn't to high. Especially since I'm not having a lot of luck finding a local hardwood supplier

Tom

[Jeff Mohr]

Can't go wrong with Steve Wall's stuff. Top notch! I've picked up and had UPS deliver...all great stuff! He even delivered some stuff himself for my father in law to the job site!!! (It did help is daughter is only 20 miles away and he stopped by on a visit to her.)

[John Thompson]

I'm in Atlanta with good local sources but... have driven to Wall's on several occasions in the past few years. A class act himself.. fair prices and has excellent stock.

Sarge..

[Hank Knight]

Charlotte Hardwood (aka. Wurth) is mostly a sheet goods supplier. H & W looks interesting.

I have bought maple, poplar, oak and walnut from Charlotte Hardwoods. The Wurth Group has stores in Charlotte, Greenville and Charleston and I've bought from all of them; not recently, but in the last two years. I've found their hardwood to be reasonably priced and of good quality. They also carry and extensive line of sheet goods.

Hank

[Kyle Edwards]

Unfortunately, Kyle Edwards is not in business anymore (i have bought from him). Charlotte Hardwood (aka. Wurth) is mostly a sheet goods supplier. H & W looks interesting..

I buy 99% of my lumber from either Groff and Groff or Hearne in Pa..

Actually I am in business, but don't want to run afoul of site terms by promotion..

[Dan Bowman]

http://www.lumbersourcing.com/

Nice folks and they do run a truck around the Carolina's

[Jim Tobias]

+1 on www.walllumber.com
I am not affiliated, but I have sung Steve's praises so many times that I should be on the payroll.

Jim

[Lee Koepke]

Actually I am in business, but don't want to run afoul of site terms by promotion..

Thats good to know!
Its a bit of a drive, but if I am ever in that neck-o-the-woods, I'll let ya know!

[Tony Joyce]

Century Forest Products, Inc. - Has ceased operations.