![Quote](images/misc/quote_icon.png)
Originally Posted by
Ole Anderson
I understand the theory behind it, but I find Sam's push prick downright scary. Just my opinion.
Completely understandable to be scared by a pointed metal push stick. I know that any kind of accident is possible regardless of how "careful" or "prepared " you are. Table saw accidents are explosive and no one can be that prepared, as Tom's video so vividly demonstrates. I don't offer my suggestion as the best of the worst, just a very good one for me and perhaps for someone else. Having said that and having tried every manner of push stick or pads - they all have their deficiencies. The one I use has given me the GREATEST CONTROL of any. The biggest downside of most notched push sticks is that they only hold your stock down at the very end and give you no lateral resistance whatsoever. My push stick allows me to secure the board 4" or 5" away from the end with a secure down force that allows me to push in any direction I need to maintain control. It is a very small contact point that lets me hold down smaller stock or profiled stock without getting anywhere near the blade. I have NEVER nicked off the end of one of these in over 20 years of use.
I do have Table Saw rules that I adhere to very strictly (and insist that everyone who has ever worked with/for me follow as well - though I do not impose the use of "my push stick" on anyone). Safety and comfort with a procedure is too personal. Just a few rules that have guided me trough my professional career behind a table saw: 1st - I don't pass any piece of wood through the saw that is not longer than the exposed blade. I want as much bearing on the fence as possible so I try to keep every piece longer than I need until it is ripped to size and plan my stock use accordingly. I would rather throw away 3" of a board than 3 fingers any day. 2) Never rip a board in such a way that a pointed cut off is facing towards me - thick end to the driver - always. 3) Don't push one piece of stock through with another leaving your cutoffs to fall to the floor or cross cut a bunch of ends leaving the cut offs to lay around the table top until swept away. 4) If I must achieve a narrow rip (less than 3/8") I use all kinds of strategies to avoid that even if I must set the saw fence a few extra times in order to leave the big part of the board at the fence with my less than 3/8" piece being the cutoff. Obviously these are just a few - too many safety precautions that are almost second nature to me to recall as I sit here writing. Safety is the PRIME CONSIDERATION for me - everything else, economy, speed, easy, are all far behind as a priority if they compromise safety. I would never have done Tom's cut even without the "controlled" demonstration - the length of that piece of wood violated my rule # 1.
OK, enough of what you already know. Just adding to an important discussion. Thanks.
Sam
"... for when we become in heart completely poor, we at once are the treasurers & disbursers of enormous riches."
WQJudge