I have a question about fiber power. I was talking with a laser rep last week and in discussions about laser power he mention that there isn't really a need for more than 30W (e.g. 50W) of power unless you're looking for speed on fiber marking.
I've done a cursory search on this and I haven't found a lot of specific information with regards to this specific topic. I thought I would throw this out for discussion. I had been preparing to pay the price difference and get a 50W laser (approx. +$10K) over the 30W laser, but the rep made sense when it came to the power. He said it wasn't going to change what I could work on, that it would only change the laser time and he asked if it was really worth the additional $10k. In my case the additional $10k for speed alone doesn't justify the need for the speed, unless it's dramatically different.
Any advice is appreciated.
Thanks...