DSC07739 (Medium).JPG
I have eight counting the two pin marking gauges. I have four Stanley Gauges, a 61, 77 and one which is a slot marking gauge.
One of the Stanley's have two beams with single pins opposite each other.
I have three home made gauges . I can't count, there are four home made gauges.
One is a cutting gauge, one with two pins at 1/2" apart and the other a single pin gauge.
I also have a two blade cutting gauge.
I made the gauges after reading an article in Pop Wood magazine.
I just wonder if I am tilted somehow, or are there others with the same affliction.
I can't count, I also have two wheel gauges.