Originally Posted by
Andy Nichols
Mike:
Thanks for the tip ordered one to test for myself....have a Lee Valley micro adj and don't like it.
So far my favorite wheel cutting gauges are the Tite Mark and the Rob Cosman gauges, really like Cosman's design that won't roll off the bench, plus the big wheel option is great for the standard as well his mortise gauge
Andy -- mos maiorum
One thing to look out for: When I received mine, the middle "spinner" that you use to adjust it was screwed tightly to the bottom of the adjustment mechanism. I took the head apart and put the tight part in my vise to use a tool to loosen it. Worked fine but here's the catch. It's left hand threads on the bottom of the spinner and right hand threads on the top. Has to be to get it to work the way it does. So if you get a tight one and have to use a tool to loosen it, remember that it's left hand threads and you have to turn it the opposite way that you'd be accustomed to.
Mike
Go into the world and do well. But more importantly, go into the world and do good.