Thanks Stephen, I should have taken a wise Creekers advice and bought the dyed veneer from Mr. Gurian rather than trying to make my own. Skipping the...
Kevin, agree to avoid short grain. I try to keep the workpieces no wider than 7” or so for architectural work with either 45 or 30 degree cuts. Flat...
Correct. The fronts and backs are literally carved to the contour while keeping precise thickness, some of which is done with cute little hand-planes...
Maintenance recommendations almost have an hour, miles, and / or elapsed time suggestion. I don't think the intervals are ever as long as 5 years. I...
That's really nice that Grasshopper did that...it's a big miss on so many small diesel machines when the small filters get employed. (And my BX22 has...
If the machine has a small port or even a 4" port, 500 CFM is impossible to achieve...it will not "fit" in a four inch duct/hose! Collection ports on...
Normal service interval for Kubota machines is 300 hours, so it certainly wouldn't hurt you to do a fluid's and filters service "now". You might also...
I’m located in Vancouver, BC, Canada but I often also use a receiving service/address in Point Roberts, Washington, just across the border and which...