Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Derek Cohen Yesterday, 8:26 AMLord, give me patience and understanding for those folks that drive needlessly in the left lane. Amen
Last Post By: Jim Becker Yesterday, 7:58 PMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Yesterday, 1:38 PMI'm volunteering for a food bank and trying to set up a cold room to store produce and other perishables. The main cooling will be done by a pair of air conditioners controlled by a Coolbot which enables the air conditioners to cool the room down below the usual lower limit for air conditioners...
Last Post By: Malcolm McLeod Yesterday, 11:45 PMOne of those sitting at the computer in the morning with a cup of coffee itching to buy a new tool ... So I come across this Veritas Scraper Burnisher for Turners and looked at a few videos reviews of it and thought why not. After reading a few reviews posted on this forum I later realized it was...
Last Post By: Thomas McCurnin Yesterday, 11:58 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
So perhaps defer to a professional who does understand.
Malcolm McLeod Today, 11:45 PMFactory tour from 1967. Wonder if it's the same saw...
https://www.youtube.com/watch?v=3-zOaOYB120
Don't forget they were still flying. Forward. So, figuring a reduced cruise in rough air of 350-ish mph (I'll stay out of the knots/hr) means in 5sec
Malcolm McLeod Today, 11:27 PMOK, not the same machine, but the adjacent one.
You can see both at 2:15
https://www.youtube.com/watch?v=DfvQxldiPSg
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Patty Hann Yesterday, 10:41 PM