Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Joe Calhoon Yesterday, 9:52 PMThere is a person, that has designed very crazy looking squirrel houses. All kinds of fancy, moving parts, and such. He sells the plans to make these squirrel houses in print form, as pdf, and as dxf. He does not sell kits, nor parts. Plans only. Oh his policy page, he writes the following: ...
Last Post By: Bill Dufour Today, 12:25 AMAnswer = Tape
Last Post By: Mike Soaper Yesterday, 8:13 PMI aim to finish these about the time the new master bedroom remodel completes. Otherwise they will clog up the shop until I have somewhere to put them. These are styled after the blanket chest I shared here which is part of the new bedroom suite. . . . . . Carcasses mainly done. ...
Last Post By: Mike Allen1010 Yesterday, 2:05 PMThinking about the electric lawnmower thread, I decided to put this in a new thread. This out to freak Doug out. I have a 2 acre point on the lake that we are getting ready to be able to rent for weddings. I want to get grass growing on it like Augusta National. To do that, it needs an inch of...
Last Post By: Tom M King Yesterday, 10:29 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I recently dried some 2" maple indoors, had it strapped with ratchet straps which I kept tight as I could, the boards still twisted, but I think
Kenneth Moar Today, 4:46 AMIm working on a set of 6 dining chairs that will have an upholstered seat cushion inset into an 18x18" opening.
How much smaller should
I have a harbor freight 2hp dust collector hooked to mine most of the time that does well, it runs on a regular 20A 120V circuit (15A plug).
If my eyes are looking at this right, all the mortises will be at the same angle.
How about cutting a piece of scrap at that angle as a guide.
the tabletop I put on top was more to hopefully fill all the little cracks, which it only sort of did. I ended up planing it all off (just barely and
Steven Cooper2 Today, 12:50 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 7:07 PM