My friend in So. Dk. was given a fair amount of Osage Orange. He hauled home and called me to tell me how heavy it was. He said it had been in a barn for several years and was thrilled to have. The next day his back was hurting severely. He lives in a small town that has pretty good medical care....
Last Post By: Bradley Gray Yesterday, 9:47 PMAnswer = Tape
Last Post By: Larry Edgerton Yesterday, 10:48 AMHi folks, I'm looking for advice on whether to ignore/repair/euthanize a misaligned Dewalt 735. A couple of years ago, I bought a used Dewalt 735 from a guy who had already installed a byrd cutterhead on it. I've recently realized that it is out of parallel by ~0.013". Picture attached...
Last Post By: Basil Stetson Yesterday, 7:43 PMWhile reviewing different approaches in preparing card scrapers I found the method used by Rob Cosman to be the most involved. Basically he recommends flattening and polishing the 3 surfaces of each side, eventually using a 16000 grit Shapton stone. He also employs the Charlesworth ruler trick to...
Last Post By: Derek Cohen Yesterday, 11:30 PMi have a adapter for a chuck on a morse taper and it works great,,my only problem is then i put it in the headstock to use it come out after you turn the machine on the morse taper comes out,,,i know you can make a drawbar for it but my problem is,, its flat with no threads,,it has a small hole but...
Last Post By: jeff oldham Yesterday, 9:42 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Both diamond stones and water stones are friable. Arkansas stones are much less friable.
The big difference is diamond stones are not a
I was thinking about my neighbours brother who landed on Juno beach 80 years ago and as a sniper somehow made it through the years and returned home.
Warren Lake Today, 12:58 AMI think it's Home Depot but if you go to return something and don't have the receipt, they ask if you have the card you used for the purchase and they
Mike Henderson Today, 12:23 AMI learned detailing from a US guy and years later tracked down a top guy here, Hes upped what he does since I learned from hjm and one of thing is
Warren Lake Yesterday, 11:50 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 8:46 PM