My router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: chris hood Yesterday, 11:36 PMHow is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.
Last Post By: Patty Hann Today, 4:01 PMBeen watching Matteo for years and now many top players are recognizing him. I think hes 24 now. Video is not great and sound not great but I can hear whats going on. Very nice of Joe to bring him up and others that are spending time with him. Hes innovative. Very unique finger picking style....
Last Post By: Warren Lake Today, 12:21 PMI'm down to 2 routers and need a couple more. I have read the 690's aren't what they used to be. Suggestions?
Last Post By: Warren Lake Today, 2:16 PMHello, I wanted to share with you my experience with oilstones. As you might know I'm slowly transitioning to oilstones, from waterstones. After spending money in a set of Dan's Whetstones I was frustrutated because I couldn't get even the slightest burr on a blade coming out of a whole...
Last Post By: stephen thomas Today, 10:15 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I have 3 strips of 1" x 12" maple for a project and 2 of them are very light while the third has a bit of grey in it. Is there any way to "bleach"
Jim Allen Today, 4:29 PMThere you go!
I've found most cheap whetstones still do their job. The difference between pricey ones and cheap ones is often things like
Maybe?
Part of it depends on the diamond plate in question. Also, part of it depends on the lubricant and pressure used. But diamond plates
I read somewhere that, at least regarding presidential elections, the question to ask a person is not "Who do you think you will vote for"
Patty Hann Today, 4:01 PMI have the same saw. You can adjust the tilt of the fence extrusion with a small set screw on the backside of the casting that the extrusion attaches
Robert Hazelwood Today, 3:55 PM
Recommendations for sailboat for novice sailors
Thread Starter: Andrew NemethHello, I’m looking for advice and recommendations for a good plan or kit to construct a sailboat for a novice crew. My 10yo daughter went to sailing camp last summer and had a blast. It was a skills based camp that eventually leads to racing and ASA certification. They used what appeared to...
Last Post By: Maurice Mcmurry Yesterday, 8:31 PM