My router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: Dan Rude Today, 4:19 AMHow is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.
Last Post By: Jim Koepke Today, 2:00 AMBeen watching Matteo for years and now many top players are recognizing him. I think hes 24 now. Video is not great and sound not great but I can hear whats going on. Very nice of Joe to bring him up and others that are spending time with him. Hes innovative. Very unique finger picking style....
Last Post By: Maurice Mcmurry Yesterday, 8:44 PMI'm pondering the economics of a mill vs buying rough lumber at retail/wholesale. In the Bay Area, depending on where you shop hardwoods like Oak and walnut can run up to $15-18bf/ft, or more for the rift/quarter sawn stuff. If one is able to source your own logs, running your own mil and kiln...
Last Post By: Maurice Mcmurry Yesterday, 7:06 PMApologies if this has been posted previously, but my search of the forum found nothing. I've been watching this series for a number of weeks now and found it fascinating. It covers the restoration/rebuilding of a 100 year old sailing yacht. The scale of the build is huge and I can't imagine the...
Last Post By: Alan Rutherford Yesterday, 10:59 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Try again Joe and let me know if you still have a problem.
Keith Outten Today, 10:06 AMIt is actually a very good tone wood. Similar to Brazilian Rosewood in both use and tone.
The reason you don't see it used often is because
His account has been updated so he should be able to post now.
Keith Outten Today, 9:59 AMThanks Tom. I was about to take the old ring down to my shop and cut it into pieces for who knows what when my wife said "You could glue it back
John TenEyck Today, 9:55 AMI'm curious - won't that give the fish and bull frogs a thrill?
Rich Engelhardt Today, 9:53 AM
Help with low motor power on table saw
Thread Starter: Karl CardHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Tony Shea Yesterday, 5:28 PM