I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Mike Cutler Today, 10:55 AMThis morning I plugged in a small electric heater for the bathroom. No sign of life, figured it was either the heater or outlet. I turned off the circuit breaker (after I found it, panel is poorly labeled), removed the outlet and began poking around with a meter. Black to white was 0 volts, I was...
Last Post By: Jim Becker Today, 10:02 AMHello, I’m looking for advice and recommendations for a good plan or kit to construct a sailboat for a novice crew. My 10yo daughter went to sailing camp last summer and had a blast. It was a skills based camp that eventually leads to racing and ASA certification. They used what appeared to...
Last Post By: Maurice Mcmurry Today, 8:42 AMA friend recently asked me to make her a cremation ashes box (for herself). I did some research and the recommendation is one cubic inch per pound of body weight. All fine. But then she suggested that we make it as something she can use while alive. I thought of a jewelry box but I know...
Last Post By: Mike Henderson Yesterday, 7:59 PMWell, I made the mistake of having my leaf blower repaired two years ago and it will not start this season, OH well. Note to self don't repair these things. Anybody use battery operated leaf blowers and how do you like them? Thanks. Brian
Last Post By: Brian Runau Today, 7:12 AMResawing takes a few things. Resawing 8-12" wide material takes a few more.
- Resawing is a power game. You need power in the form the motor
I finally got to do some serious cutting on my 17" grizzly bandsaw. I resawed some 8/4 poplar into 4/4 without the saw breaking a sweat. Going
Myles Moran Today, 10:22 AMThe Makita website still has the 2017-dated IPL for that saw on the saw's product page link.
I would contact Makita and inquire about the
The price difference between 15a and 20a receptacles is minimal in the larger scope of things (I buy the better grade, not the cheap ones) and I prefer
Jim Becker Today, 10:02 AMI will sell for $450 including shipping continental USA.
Thank you, Ed.
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Jerry Bruette Today, 9:16 AM