I agree with Andrew for the reasons he stated...with the small machine for scrolling and detail work, go for the larger wheel and power machine when...
For the size of this shop for distances and drops, I strongly suspect that the current DC is potentially inadequate as the 6" inlet absolutely limits...
A compression bit will work, but they are generally designed for situations where one needs to have pristine cut lines on both top and bottom. There...
Appears that way. As someone already noted, Craftsman/Sears never actually "made" any of their products...they were contract manufactured in the case...
I can appreciate that thought, Edward. But SB&D has chosen DeWalt as their high end and Craftsman as their value line. They are going after Milwaukee...
That's pretty doubtful, unfortunately. The sub-bases that screw on the bottom, yes, but not the actual fixed or plunge bases. I don't think they are...
They aren't what they used to be because they have not existed as a product being sold for many years now! The 800 series more or less replaced them...
Ed, simply become a Contributor and you'll have access to the Private Messaging system as well as images and the Classifieds. The minimum ask is only...
Frank, to-date, I have not had any issues with my mini split filter getting clogged up here at the new shop nor at the old shop. (different units, of...
They have no heads, so shot straight in, they don't have a lot of "holding" power. Now shoot them in at random angles and they are a lot more secure....
Our setup is the same, Brian, except the soffit was already there. I still need to do the mud-work on the drywall...it was supposed to be done when I...