Google "Baldwin"- Have seen some of their locksets that were full mortise
Type: Posts; User: John R Green; Keyword(s):
Google "Baldwin"- Have seen some of their locksets that were full mortise
Make sure the trunion is not hitting on the 4" dust collection hose below it......happened to me
What size hinge ?
Door thickness ?
Gary
They are code spec's for handrail design
Google Stair Code
John
Go to YouTube
Key in "Folding a bandsaw blade"
You'll be a pro in a few minutes
Have the same machine.
Had the same thing happen to me.
Decided to do the same upgrade.
You will love the Helical Head.
George
Do it all the time on 15" Powermatic with Helical Head.
Wet PT is messy.
KDAT not so bad.
When done I pop the top and clean with toothbrush and mineral spirits
No problem
PM me
I'll send some pic' that will help
Please post pic's of shutters to be replaced.
Mike
I build shutters, louvers and structural decorative brackets with western red cedar.
Use the Domino 700 with 14mm Sipo Domino's and Titebond 3 for everything.
Never had a failed joint.
...
Rich
Boral is a great product for exterior use.
Totally impervious to weather.
Use same screw pilot hole chart for hardwood.
Round eye hook at least 1" long will suffice.
John
Matt
Get it ASAP.
Then you can answer those questions yourself.
John
16 ga 2"
The sprocket has a tooth that fits into that keyway of the shaft.
The tooth sheared off and the sprocket had just enough friction to turn the rollers without any pressure. Insert board, stopped...
Can you get parts breakdown online ?
No complaints about machine
Came in a box
Assembled it without problems
Does what I need done in short amount of time
Like going from a hand held circular saw to a table saw
Got one this year.
For what I build, it's was a great investment.
302009302010302011
John: How does your head cut on the outside edge - any height related issue like a step left in the jointed face?[/QUOTE]
John Green replies ......As flat as the "flat earth society thought the...
Just installed Byrd Head in Powermatic 54A Jointer.
Looks just like yours.
Crooked tooth lines up with rabbet groove on my machine.
301347301348
woodcrafters.com
sales flyer
page 7
top half
Just changed Powermatic jointer and planner to Byrd heads.
A lot quieter than factory blades.
Cuts are smoother than STP on glass.
Could not be happier.
Same symptoms with planer last week.
New staring capacitor ( $13 ) fixed it
It's called Plyboo - Google it
Why not give it to someone on this forum that could.
I have a SP-0125 Green splitter (1/8") that I will not be using.
If you want it, let me know where to send it.
John