Just a note on these air filters: the filters (both pleated and bag filters) are general use HVAC filters, readily available at any air conditioning filter supplier at a much lower price than the...
Type: Posts; User: Tom Berninghausen; Keyword(s):
Just a note on these air filters: the filters (both pleated and bag filters) are general use HVAC filters, readily available at any air conditioning filter supplier at a much lower price than the...
My shopping for a cabinet saw ended at a local vendor when the sales guy, turned out to be the owner, remarked he was leaving for Bora Bora (or some other Pacific island, I got CRS) for a "sales...
Wayne has let the secret out. Use any local HVAC air filter shop for replacement filters for your air cleaner.
Just tell them you want a 12x24x18 (or what ever your bag measures) three pocket bag...
Must be my day to pimp books Peter, see my 2 cents to the Office Furniture Plans? thread.
Take a look at Dover Publications Mission Furniture: How to Make It.
There's an umbrella stand on page...
Let's go to the library Dave:
Dover Publications has my Mission bible: Mission Furniture: How to Make It. My copy was $9.95 at Powell's Books but I would guess the book is fairly available.
...
Sometimes I think I have toooo many jigs...
When I made my own gates for pvc pipe I made some spare pieces for cutting the sewer and drain pipes. I slide a pair on the 10 foot sticks and then use...
My G0555 has the same fence problem that Burt mentioned: I can't get my cuts to drift either. Not in red oak, soft maple or alder. Must be defective. Timberwolf 3/4 inch blades is all I use, maybe...
http://www.msipro.com/Scripts/default.asp
You might like these folks.
Tom
Hi Frank,
To save wear and tear on the search button:
http://www.sawmillcreek.org/showthread.php?t=36340
Tom
Not sure if this should become a show and tell, but since I did just that recently...I found my plans by Google. There are agricultural plans available on the net that will show you how to build a...
Oliver\Art (?): the invoice says I ordered one 49213 and one 22944. As I mentioned in one of the earlier posts, the lower guide block holder needs to be filed to clear the thrust "bearing".
Mike:...
http://www.hartvilletool.com/product/11206
Has the whole ceramic lashup. I wanted to "do it once" and be done with it. As usual that was after getting a spare set of the standard bearings at my...
Thanks for the kind words Oliver, the outhouse in particular was great fun, it was a birthday present for my older brother, who, like all my siblings, is full of BS and always needs an outlet.
...
Don't know where I found the information, but Grizzly has guide block holders which allow using guide blocks on a G0555. If this was posted here, sorry to repost, but I figure somebody else might...
Took the trip to Bellingham to check out the 0555 when I first heard of it, travel was a full day from just south of Portland, Oregon.
The saw has done everything I have wanted it to do, using TW...
Hmmm. My memory says that Weyerhaeuser cornered the Alder market by driving up the cost of logs to put smaller mills out of business. Which naturally raised prices for the finished lumber. First...
Us west coasters don't have the options, drat it, that the folks on the other side of the Rockies have, small mills versus retail\wholesale suppliers. Red alder is a fine material to work in until...
Hi Darren,
The main challenge I think you are building into your system is using the flex hose. I'd recommend using pvc, 4 or 6 inch, to as close to your machines as possible. As to the flow in...
The HF 2hp DC gets a lot of positive reviews all over the woodworking sites, so it must work OK. I've recommended it to my brother for his turning work.
From my experience the plastic garbage can...
I got one when I bought the DC, and it worked fine until I got a planer, then I was stopping so often to empty it (and the bags) that I found a better, lazier solution.
Take a look: Shop shot...