I did not like the spray pattern in my shower head, so I cut a new diffuser screen to make a much finer spray pattern also I have cut out some cookie patterns for baking and other assorted things.
Type: Posts; User: James Stokes; Keyword(s):
I did not like the spray pattern in my shower head, so I cut a new diffuser screen to make a much finer spray pattern also I have cut out some cookie patterns for baking and other assorted things.
On mine, I had the power supplies rebuilt, installed them and the mother board was blown. I was told that was what took out the power supplies.
If you want any state seal, here is where you can buy it.
http://mydrawingboard.com/library/symbol/states/
What I do is take poster board and cut 3/4 inch circles out of it. Then just drop it on top of your lens.
I agree 100% that alignment can be a real Bi**H. I got a new tube for my laser and worked...
On really odd shaped objects, I use electrical tape. It has enough flexibility to conform and comes off very easy.
I engrave a lot of acrylic handles. What I did was take a piece of 1/4 acrylic, Cut 2- 1/4 slots in it to put 1/4 inch acrylic upright. I then take 2 more pieces of acrylic and cut notches shaped the...
For the problem with scorching cover with tape first.
Just found another bug. All of the boxes I have been drawing are automaticly grouped and ungroup is grayed out on the menue. You have to break curve apart. I would go back to X4 but I got an error...
No that does not work either. Before doing anything on the page it shows everthing to be RBG. Then say I draw a box, that outline is CMYK. I can bring up the palette and it shows fill and outline to...
Nope everytime I set it and save the very next object reverts back to cmyk.
The people that went to my reunion were the jocks and cheerleaders. Their greatest achievment in life happened because they considered themselves B.M.O.C. They still live in the past.
I looked at the photos of mine. Their was not a single person of the 30 or so people I ran with. I remembered very few of the people who went.
My High School reunion is this weekend also, But it is about a thousand miles from here. I passed on going
In Corel X5 one of the things they tout is improved AI importing.
Change them to EPS in Illustrator and you should not have a problem.
They have changed the connect lines in X5. I have not played with it yet but looks like it will be much better.
My wifes company owns a company in China specifically for their own products. They can not get their product here nor can they get the quality control up to standards. They have owned the Chinese...
I just installed Corel X5. The default color for fill and outline were cmyk. I managed to make RGB the default for the fill but not for the outline, that defaults on every item as cmyk even if I...
One thing you can do to minimize your cost on using granite is take one piece and cut in to 2" strips, then you take one strip and place it where the most detail will be and engrave just on the...
It is typical with the Vytek lasers. They were not designed to cut. The problem is due to the motor used, as it goes around the circle the stepper ratio is off. You will never get a smooth circle.
I always use it unless I am cutting paper or something extremely light. To me it seems to help keeping the lens clean.
No that image you need to invert. Also you are using a low quality granite.
I agree with Bill, I run marble high power low speed. You can get very detailed high resolution images on marble.
I have cut 3/4 white oak with my 100 watt and am unable to cut 1/4 Ebony. Depends on the woods.
I have a new tube coming that is supposed to test out at 140 watts. I will see how it cuts when I...
Yes Johnson Plastic.
To me it sounds like the laser is just a hair out of alignment. A couple things you can do to change depth in areas, !. Duplicate the part you want deeper and leave it directly on top of the other....