Yep, that's my second hobby.
Randy
Type: Posts; User: Randy Blake; Keyword(s):
Yep, that's my second hobby.
Randy
I finally finished a self designed DVD/CD storage unit for the living room.
All red oak with 1/4" acid etched glass for the doors and sides.
I just need to let the stain cure a while longer and...
Thanks for the feedback everyone.
I've already sanded to 220, so for this project I guess it's overkill. Next time I will save some time.
BTW, I finished my test board and I'm glad I took the...
Hi all, I'm doing a project (DVD Storage) using red oak.
Is there any benefit to sanding past 220 grit?
I plan on staining and probably a lacquer top coat. There is some oak plywood involved...
Check with your local glass shops. They should be able to supply a copper free mirror which is less susceptible to water/steam. The edges should not be sealed on copper free mirror but should be on...
Back on the subject.
Look under the outfeed table. That is where my factory tools are stored.
Randy
Thanks for the info all.
I still have to buy the wood for the top so I will make an effort to to lay it out in the store.
My main concern was with potential cupping problems but it sounds like...
Hi all, new member here. Very good site.
I am in the process of making a blanket chest out of red oak. I need to glue up the top and I am not sure of the board width I should use.
The main...