What do you mean by bonkers? Does the impact run the battery completely down after two screw? Or does the impact just not have the power to drive the screws?
I currently have two m18 3/8" impacts,...
Type: Posts; User: Carl Crout; Keyword(s):
What do you mean by bonkers? Does the impact run the battery completely down after two screw? Or does the impact just not have the power to drive the screws?
I currently have two m18 3/8" impacts,...
Then there is this: dowelmax vs domino
https://www.youtube.com/watch?v=_vgAeGCATgM
I found this on a Festool group:
Here's the link if it's allowed: https://festoolownersgroup.com/index.php?pretty;board=festool-tools-accessories;topic=domino-joint-strength.0
Fine Woodworking...
We have a vacation home with solid pine doors and pine window frames. My GF wants them to just have a clear finish.
In the past I have used oil based poly but she doesn't like the yellow look that...
It should be faster to use the beadlock system
You are welcome. Rockler currently is out of stock on the bit and on the stock so I will test it out once I get one or the other.
Maybe after using it a 1000 times you might get some slop in it and have trouble. It also may be slow but if on a budget WAY cheaper than a Domino..
1/2" center to center on the 3/8" holes
463790
The dowelmax only does dowels while the beadlock does the beadlock tenons. What's your complaint about the system?
I could use it both ways. As a doweling jig and then when I need the extra strength use the beadlock stock.
Thanks for the replies
I bought the Rockler Beadlock to experiment with. Any reason I shouldn't just use three separate 3/8's dowels as opposed to buying Rocker's wood or their $70 bit to make my own stock?
Looks like the...
Thanks very much
Thanks, I might give it a try
Anybody tried this yet? Pros? cons?
https://www.kregtool.com/shop/cutting/circular-saw-cutting/accu-cut/KMA2700.html?_ga=2.18551481.1459941922.1628087631-198063372.1628087631
I have a Jet 15" 3 hp and the DW. DW has NO snipe. Jet has bad snipe.. I would keep the DW and sell the helical head and go back to knives..
Before we had internet forums we had Norm "selling" us new tools. I bought the PC biscuit joiner, used it once or twice and sold it. Now we have the internet. One guy gets a track saw and we all...
The extra grand gets you the South Bend name stuck on a Grizzly machine.......
If the blades are nicked the water stone takes forever to get the nicks out
Sawstop patents start expiring this year. I understand they have several. I am hoping that someone else comes out with the same finger saving system that doesn't destroy a blade and cartridge. At...
Sure they do. John Deere even has a spec as to how much bleed off is normal
Transfer punches. Very useful around the shop...........
...
I would build a router table and put a router lift and 3 hp router in it. I would also not upgrade my DW735 to a Grizzly with helical head. My 735 with plain knives suits me fine! Has no snipe at all...
I had the Jet mortiser about 10 years ago. I spent lots of time sharpening the chisels but never could get smooth walled mortises. finally sold it and now I use my router and homemade mortising jig
I have a 2003 or so X5 Unisaw. Nothing wrong with it at all. It wasn't made in China either.
If I can find another I will buy it for my vacation home shop
I am left handed but had to learn to use tools right handed such as a circular saw. Now that I have several left bladed saws I cut with either hand. If I want accuracy (being able to see the line...